Connect with us

Editorials

Your Best Laptop Sticker Removal Tips

Published

on

John Harrelson/Getty Images for NASCAR

John Harrelson/Getty Images for NASCAR

One of my biggest pet peeves are all the stickers that laptop / tablet pc OEMs plaster on the wrist pad of their computers: AMD, Intel, Wacom, Vista, Joe’s Diner – you name it, it’s on there. Come on OEMs – my computer is not on the NASCAR circuit and I don’t remember signing a contract giving you permission to advertise on it. HP, Dell, and Toshiba – I’m looking at you!

Needless to say, the stickers are normally the first things to go when I prep a new computer. Sometimes, the stickers are really easy to peel off. Other times, though, it takes a lot of effort to get all the sticky glue off. Point in case – I just spent an hour removing two stickers from a friends Dell computer. Over the years, I’ve learned that Krud Kutter and WD-40 are the best liquids to cut through all that glue.

What about you? What do you use take back your wristpad?

12 Comments

12 Comments

  1. Ryan

    02/15/2009 at 1:05 pm

    My secret is an orange scented solvent called Goo-Gone. It’s quite possibly the most amazing “sticker goo” remover that I’ve ever used. You just put it on the goo, wait about 10 seconds, and wipe the goo off. It’s like it was never there! You just have to make sure that you wipe up properly afterwards, because it will take just about anything (including finishes) off of your lappy.

  2. Joe

    02/15/2009 at 1:40 pm

    I had a giant ugly “Refurbished” sticker on the bottom of my Dell XT, and after peeling it off as best I could on my own, I used rubbing alcohol and the sticky stuff left behind came right off.

  3. chad

    02/15/2009 at 3:46 pm

    One more win for Lenovo and my X200 tablet. It didnt come with any stickers on it. Well it has one for engery star which had a pull tab to help remove it.

  4. bmhome1

    02/15/2009 at 4:30 pm

    Another vote for Goo Gone (widely available in drug stores and supermarkets), must have home all-around life-saver.

  5. Ben

    02/15/2009 at 6:41 pm

    I have to correct the above post on Lenovo. My X60 came with 3 but I took them off so long ago, I can’t remember what they were. Chances are, the energy star, and a Vista Capable sticker were 2 of them. I just peeled them off and just slowly worked on them with elbow grease over time. I didn’t take a chance with solvents.

  6. HG

    02/15/2009 at 8:47 pm

    I have used WD-40 in the past but also sometimes use Goof off, not the strong one the water base one; don’t want the finish to come off :)

  7. steve

    02/15/2009 at 8:59 pm

    The best thing hands down is simple vegetable oil. I use goo gone too, but it does no better than vegetable oil and can be more destructive on those soft plastic parts. After you pick off the sticker to expose the residue, just dab a bit of vegetable oil on a soft cloth (don’t poor it on the device!) and rub for 5 or 10 minutes at most. You’ll have a beautiful surface.

  8. John in Norway

    02/16/2009 at 2:40 am

    I don’t take stickers off. They remind me, many years later, what’s inside the computer. I’ve even been known to still have the screen protector on some of my small devices many years later. Remember, a scratch isn’t just for Christmas, it’s for life.

  9. sbtablet

    02/16/2009 at 7:01 am

    I use Goo Gone. Great stuff! My husband considers the stickers part of the computer, and he had a fit when my son wanted to get them off for him. And no, he’s not into NASCAR. I don’t know what gives, but whatever makes him happy.

  10. duffyanneal

    02/16/2009 at 8:38 am

    Ahhh! Why do you guys insist that some sort of miracle chemical needs to be used? I’ve owned over 50 notebooks over the past few years, and I have NEVER used anything except the sticker to remove the adhesive. Carefully peel off the sticker from one of the corners. If you notice the glue sticking to the palmrest instead of coming off with the sticker just stop. Reapply the sticker and try a different corner or different angle. Eventually, you’ll find a corner you can peel which will remove the majority of the adhesive. It’s likely you’ll still have some adhesive left behind. To remove it use the sticker you just removed. The adhesive on the sticker will bond nicely to the adhesive residue and pull it right off. You might have to do it a few times, but it beats using any chemical on the palmrest which may discolor or remove the paint and it’s free.

  11. aswfreak29

    02/16/2009 at 4:30 pm

    fingernails work quite well actually

    • Kaylee

      02/29/2016 at 6:06 pm

      Not really cause you get little bits off a time

Leave a Reply

Your email address will not be published.

As an Amazon Associate I earn from qualifying purchases.