Connect with us

Mobile

How to Root the Nook Color 1.2: Basic and Dual Boot HoneyComb Methods

Published

on

It isn’t as easy as some of the past methods of rooting the Barnes and Noble Nook Color, but it gets the job done. A tool called Manual Nooter has been posted at the XDA Developer’s Forum which can be used to root your Nook Color even with the latest 1.2 software update. Why would you do such a thing? Imagine being able to run Amazon Kindle on the Barnes and Noble Nook Color. That is just one of the many apps you could run after rooting the device.

We have compiled the best guides for rooting the Nook Color eReader so you can have one place to find them. The two methods here include one that will change the software installed on the Nook Color and one that will not modify the installed software at all. The first is more stable while the second is less likely to mess up your Nook Color.

Preparing the SD Card

The first thing you will have to do is get the latest 1.2 update, which you likely already received automatically when Barnes and Noble sent it out a couple of weeks ago. If not manually download it from the Barnes and Noble site. Once you get the update, you will also need to have a micro-SD card which is used to install the modified firmware. Of course, you will need to have a Nook Color already registered with Barnes and Noble. We recommend registering it with a Gmail address. It makes things simpler. If you registered with another email you can still root it, but it is not as easy to get all of the Google goodness that comes with Android after the root process is performed.

First, prepare the SD card with something called ClockworkMod. It is all explained in the XDA Developer’s Forum. In step 3 of the link it says, “Burn the SD card as instructed.” The problem is the linked instructions are for Windows only. If you have a Mac or Linux follow the steps at the Nook Devs Wiki. They also have Windows instructions for making an SD card from an IMG file. About half way down the page there are some highlighted sections. The yellow part is for Linux, darker blue for Windows and lighter blue for Mac. Follow the steps substituting the name of the IMG file you download from the above linked XDA Developer’s forum post.

This process involves the command prompt or Terminal in Linux or Mac. If you are uncomfortable with either, call a geek or just enjoy your Nook Color as it came from Barnes and Noble.

Performing the Mod

Once you have the SD card prepared continue with step four in the guide at XDA to finish preparing the SD card. Now you are ready to actually perform the rooting process on the Nook Color. The steps for applying Manual Nooter from the SD card is also at XDA Developer’s Forum. The result is a rooted Nook Color.

Realize that this will alter your Nook Color. You can restore it to factory settings with some effort. It is really hard to destroy your Nook Color so even if you get into trouble there is almost always a way out. To start over follow the steps the following two pages:

  1. Clean System by forcing 8 failed boots
  2. Clean all personal data with the factory reset

Honeycomb Booted from SD Card

This is not the only way to get a rooted Nook Color. If you want to play around with a combination of Honeycomb and another root mod called Phiremod, you can create an SD card that will dual-boot the two systems without ever changing the stock software on the Nook Color. The operating system runs like a Live CD only from the SD card. After following the steps in the XDA post you will have access to the dual-boot environment. This is not as stable as installing the above Manual Nooter, but it is also better if you want a Nook Color that is not modified at all.

8 Comments

8 Comments

  1. Guest

    06/20/2011 at 12:28 am

    • Guest

      06/24/2011 at 2:50 am

      Boo…why pay for a card when you can do it yourself?

      • Jusuje

        12/11/2011 at 8:12 pm

        you might be able to but many arent, or dont have the time….

  2. Orenative38

    06/23/2011 at 1:56 pm

    Sucks, because you cannot load any of your personal files, if you are booting from an SD card …. the SD card will not permit it … so there you go …. a great device that can only be addressed thru your wifi …. like I said, sucks.  Go out and buy a Galaxy Tab …. and avoid this garbage.

    • grokkage

      07/08/2011 at 3:06 am

      RTFA. 

      If you want to revert your card to a “usable” state.Go to Settings > Device Info > SdCard > UnMount > FormatThis will wipe your SDCard of all MN/CWM Flashable abilities. If you use this you will have to reflash the SDCard for future MN releases.

      • Kil

        09/12/2011 at 5:35 pm

        RTFP, he means use the sd card while rooting.

  3. Bleudog

    07/10/2011 at 11:16 pm

    I couldn’t follow all the threads and links. My software is 1.2.  It seems to be a fast moving ever changing updates.

Leave a Reply

Your email address will not be published.

As an Amazon Associate I earn from qualifying purchases.