Our always reliable forum members unearthed the service manual for Dell’s unannounced XT2 Tablet PC. — complete with specs, pictures, and all.
Complete specs and more pictures after the break.
- DDR3, eSATA, GMA X4500 graphics (they dropped the ATI video card)
- Capable of 5GB of RAM
- 1.8†SATA
- 34mm Express Card ( a change from ExpressCard 54)
- One USB port capable of PowerShare, which can charge a USB device while the tablet is off
- They are sticking with ULV
- Notice the antennae bump on the right side of the screen, which is a change from XT which had a little lift tab in the middle of the bezel.
- According to the manual, they’ve also done away with one of the programmable buttons — email.
- The weight of 2.2 lbs looks suspiciously low. I can’t imagine them dropping over a pound in weight going from XT to the XT2. I’m thinking the weight is not including battery or display.
Click images for a larger view
 |
|
 |
|
 |
|
 |
|
 |
|
| Notice the missing email button from the XT |
|
|
|
|
|
|
|
| Processor |
| Processor type |
Intel ® Coreâ„¢ 2 Duo ULV |
| L2 cache |
3 MB |
| External bus frequency |
800 MHz |
| System Information |
| System chipset |
Intel SFF Chipset |
| Data bus width |
64 bits |
| DRAM bus width |
Dual-channel (2) 64-bit buses |
| Processor address bus width |
36 bits |
| Flash EPROM |
4 MB |
| PCI bus |
32 bits |
| ExpressCardâ„¢ |
|
NOTE: The ExpressCard slot is designed only for ExpressCards. It does NOT support PC cards. |
|
| ExpressCard connector |
ExpressCard slot (supports both USB- and PCIe-based interfaces) |
| Cards supported |
34 mm ExpressCards |
| External bus frequency |
800 MHz |
| Secure Digital (SD) Memory Card Reader |
| Cards supported |
SD, SDIO, SD HC, Mini SD (w/adapter) MMC, MMC+, Mini MMC (w/adapter)) |
| Memory |
| Memory module connector |
one user-accessible SODIMM socket |
| Memory module capacities |
1 GB, 2 GB, 4 GB |
| Memory type |
DDR3 SODIMM |
| Minimum memory |
1 GB (onboard memory) |
| Maximum memory |
5 GB capable (requires 64-bit Windows Vista ® operating system) |
| Smart Card |
| Read/write capabilities |
Reads and writes to all ISO 7816 1/2/3/4 microprocessor cards (T=0, T=1) |
| Cards supported |
3 V and 5 V |
| Program technology supported |
Java cards |
| Interface speed |
9600—115,200 bps |
| EMV level |
Level 1 certified |
| WHQL certification |
PC/SC |
| Compatibility |
Compatible within a PKI environment |
| Insert/eject cycles |
Certified for up to 100,000 cycles |
| Ports and Connectors |
| Audio |
microphone connector, stereo headphone/speakers connector |
| IEEE 1394 |
4-pin serial connector |
| E-dock |
Standard E-Dock connector for devices such as E-Dock advanced port replicators and expansion stations
The optional media base can be connected to the E-Dock connector. |
| Mini-card |
One dedicated half-mini-card slot for WLAN
One dedicated full-mini-card slot for WWAN / GPS (mobile broadband) |
| Network adapter |
RJ-45 port |
| USB |
two 4-pin USB 2.0-compliant connectors |
| Powered USB |
5-pin power supply and 4-pin USB
2.0-compliant connector |
| USB |
Two 4-pin USB 2.0-compliant connectors
One USB connector can be used as an eSATA connector. The other USB connector with PowerShare can be used to charge a USB device when the computer is turned on or off. |
| Video |
15-hole connector |
| Communications |
| Network adapter |
10 / 100 / 1000 Ethernet LAN on system board |
| Wireless |
internal WLAN, WWAN, and Bluetooth ® wireless support (if optional cards are purchased) |
| Video |
| Video type |
integrated |
| Video controller |
Mobile Intel ® GMA X4500 Graphics Controller |
| Data bus |
integrated |
| Video memory |
up to 256 MB shared memory |
| Audio |
| Audio type |
two-channel high definition audio codec |
| Audio controller |
IDT 92HD71B |
| Stereo conversion |
24-bit (analog-to-digital and digital-to-analog) |
| Interfaces: |
|
| Internal |
high definition audio |
| External |
microphone-in connector, stereo headphones/speakers mini-connector |
| Speaker |
one 4-ohm speaker |
| Internal speaker amplifier |
2-Watt channel into 4 ohms |
| Volume controls |
Volume control buttons and program menus |
| Display |
| Type (active-matrix TFT) |
|
| Active X / Y |
12.1 inches WXGA |
| Dimensions |
| Height |
261.12 mm (10.28 inches) |
| Width |
163.2 mm (6.43 inches) |
| Diagonal |
307.34 mm (12.1 inches) |
| Maximum Resolutions |
1280 x 800 at 262 K colors |
| Operating angle |
0 ° (closed) to 160 ° |
| Refresh rate |
60 Hz (40 Hz in All Day Battery Life (ADBL) mode) |
| Viewing angles |
| Horizontal |
40/40 ° |
| Vertical |
15/30 ° |
| Pixel pitch |
0.204 |
| Power consumption (panel with backlight, typical) |
3.0 W (max) |
| Keyboard |
| Number of keys |
87 (U.S. and Canada); 88 (Europe); 91 (Japan) |
| Layout |
QWERTY/AZERTY/Kanji |
| Touch Pad |
X/Y position resolution
(graphics table mode) |
240 CPI |
| Size |
| Width |
73.0-mm (2.9-inch) sensor-active area |
| Height |
42.9-mm (1.7-inch) rectangle |
| Battery |
| Type |
4-cell: 28 Whr/14.8V
6-cell: 58 Whr/11.1V
Slice 48: Whr/11.1V |
| Dimensions: |
| Depth |
| 4-cell lithium-ion battery |
210 mm (8.27 inches) |
| 6-cell lithium-ion battery |
210 mm (8.27 inches) |
| Slice |
9.5 mm (0.38 inch) |
| Height |
| 4-cell lithium-ion battery |
18 mm (0.71 inch) |
| 6-cell lithium-ion battery |
23.2 mm (0.91 inch) |
| Slice |
186 mm (7.32 inches) |
| Width |
| 4-cell lithium-ion battery |
46.5 mm (1.83 inch) |
| 6-cell lithium-ion battery |
68.5 mm (2.7 inches) |
| Slice |
279 mm (10.98 inches) |
| Weight |
| 4-cell lithium-ion battery |
0.2 kg (0.44 lb) |
| 6-cell lithium-ion battery |
0.37—0.38 kg (0.82—0.84 lb) |
| Slice |
0.59—0.61 kg (1.3—1.34 lb) |
| Voltage |
11.1 VDC (6-cell, Slice)
14.8 VDC (4-cell) |
| Charge time (approximate) |
| Computer off |
approximately 1 hour to 80% capacity (4-cell battery)
Approximately 2 hours to 100% capacity (4 cell battery) |
| Life span (approximate) |
300 charge/discharge cycles |
| Temperature range |
| Operating |
0 ° to 35 °C (32 ° to 95 °F) |
| Storage |
-10 ° to 60 °C (14 ° to 140 °F) |
| Coin-cell battery |
CR-2032 |
| AC Adapter |
| Input voltage |
90—264 VAC |
| Input current (maximum) |
1.1 A |
| Input frequency |
47—63 Hz |
| Output current |
3.3 A (maximum at 10ms pulse)
2.3 A (continuous) |
| Output power |
45 W or higher |
| Rated output voltage |
19.5 ±1.0 VDC |
| Dimensions: |
| Height |
16 mm (0.63 inch) |
| Width |
63 mm (2.48 inches) |
| Depth |
88 mm (3.46 inches) |
| Temperature range: |
| Operating |
0 ° to 40 °C (32 ° to 104 °F) |
| Storage |
—10 ° to 70 °C (—50 ° to 158 °F) |
| Fingerprint Reader (optional) |
| Type |
UPEK TCS3 TouchStripâ„¢ strip sensor with CMOS active capacitive pixel-sensing technology |
| Array size |
248 x 2 pixels |
| Physical |
| Height |
19.95—26.82 mm (0.79—1.06 inch) |
| Width |
290.6 mm—296.6 mm (11.44—11.68 inches) |
| Depth |
204 mm—226 mm (8.03—8.9 inches) |
| Weight |
1 kg (2.2 lb) |
| Environmental |
| Temperature range: |
| Operating |
0 ° to 35 °C (32 ° to 95 °F) |
| Storage |
—40 ° to 65 °C (—40 ° to 149 °F) |
| Relative humidity (maximum): |
| Operating |
10% to 90% (non-condensing) |
| Storage |
5% to 95% (non-condensing) |
| Maximum vibration (using a random-vibration spectrum that simulates user environment): |
| Operating |
0.66 GRMS |
| Storage |
1.3 GRMS |
| Maximum shock (measured with hard drive in head-parked position and a 2-ms half-sine pulse): |
| Operating |
143 G |
| Storage |
163 G |
| Altitude (maximum): |
| Operating |
—15.2 to 3048 m (—50 to 10,000 ft) |
| Storage |
—15.2 to 3048 m (—50 to 10,000 ft) |
| Airborne contaminant level |
G2 or lower as defined by ANSI/ISA-S71.04-1985 |
<><>
</></>