I received the LE1600 last Friday. With everything that Motion has done innovation wise to this tablet, I was really excited about the possibilities. I’ve always liked the Motion tablets: I’ve owned 2 of them prior to this one Ã¢â‚¬” M1300 and M1400VA. Motion kept up with excellence in design and innovation and there is much to be impressed with in the LE1600. What did I buy? 1.5 ghz, 60gb, 512mb of RAM. View Anywhere Motion pak software Accessory cable CD / DVD drive Bump case Convertible keyboard Extended battery USB keyboard and desktop stand I purchased a 1gb stick of RAM from Crucial to max out at 1.5 gb of RAM.
One of my first thoughts when I picked up the tablet was how much lighter and well balanced it felt. It felt very similar in weight to my TC1100. But its’ a lot of faster than the TC1100. I was a little disappointed in how the screen sits a little below the casing. I can’t understand why Motion continues to design their tablets that way. I’d love for the screen to sit flat with the casing. It provides a very smooth surface for your hand and wrist. The TC1100 and the Toshiba tablets are that way, and it makes a big difference in the overall experience.
Writing on the tablet
It has a glass like surface. Having used the M200 and its’ paper-like surface and the TC1100 and its’ glass-like surface, I’ve determined that I really don’t have a preference. For those of you who do, that might be an important factor. I’ve noticed no difference in writing quality.
Handling the tablet
The taper on the back of tablet provides a very nice grip. It never occurred to me when I bought it how much I would appreciate the taper. In addition, the battery has a nice rubberized grip to it. One thing I miss is the hardtop cover that protected the tablet when transporting it in a bag. These were standard with the M1x00 series. I don’t know why they left it out. On several occasions, the vga port cover came off when I handling the tablet. I’ll likely just remove the cover. Its’ not designed very well to stay connected to the tablet. The pc card slot has a dummy plastic card to sit in the slot. Its’ very loose and was one of the first things I noticed when I picked it up Ã¢â‚¬” it kind of rattles when the plastic card is in the slot. I’ll be putting in a different pc card so it won’t be an issues, but it really sends the wrong message when you first pickup the tablet and hear a rattling noise and feel something moving about. Put a dummy card in there that fits. This is Motion’s first tablet with a fan. I have yet to hear it turn on. I do notice that it gets warm, but unlike the M1400VA, it does not get hot, even when plugged in to the power supply. Others on TabletPCBuzz.com have reported that it gets hot, though. Although I prefer a very smooth back on the tablet, the rubber pads are very nice and much improved over the problematic rubber feet on the M1300 and M1400. They don’t interfere too much with the handling of the tablet. When you’ve used as many tablets as I have, you come to appreciate the finer details like a smooth back and a smooth front. Simply put, the viewing angles on this tablet are simply amazing. Enough said. Look at the pictures.
I’ve had periodic issues with my wireless. I switched from the windows client to the Intel Proset, adjusted the power options, and things settled down. It still goes off every now and then. I’m going to play with some different WAP’s and continue to work with tech support on this issue. As a point of reference, I had similar problems with my M1400VA staying connected to my LinkSys WAP and it used the same adapter. When I changed it over to the Dell mini pci card, it worked flawlessly. There is a button on the side of the tablet that makes it easy to turn on / off wireless. I used it several times during church this past Sunday. Having that kind of accessibility to the wireless device is a productivity saver and saves a lot of mousing around.
I really like this pen. It feels good and is well balanced. Its’ very similar to the TC1100 pen, but not as heavy. Unlike the Cross pen, you don’t need to press down on the eraser tip in order to erase.
I like how they implemented a balance mechanism so that when the pen lays flat on the tablet or desk, it doesn’t roll away. I wish more OEM’s would implement that feature in their pens.
I’ve had mixed results with the fingerprint reader. It took me at least 30 minutes to get one finger verified. After doing two swipes with good reads, it consistently failed on the third attempt. I got the best results when swiping away from the tablet Ã¢â‚¬” unlike the animation sequence which demoed swiping toward the tablet. The integrated fingerprint reader will be very useful when logging in to websites. One of the features I like best about the fingerprint reader is that it doubles as a verticle scroll when not being used for security purposes. It also adjusts the orientation depending on the orientation of your tablet. For example, If I’m in landscape mode, I swipe my finger vertically with the reader to go up and down the window. If I’m in portrait mode, I swipe my finger across the short width of the reader. So, you can now use either the finger printer reader or the larger scroll button for your browsing and reading. One frustration with the fingerprint scrolling is that you have to click on the active window in order to start scrolling, whereas the larger scroll button automatically adjusts itself to the active window.
As I stated above, the battery has a nice rubberized grip on it. Taking the battery out and putting it back in takes a little bit of practice, however. There are two latches on the back. Figuring which one does what and coordinating your hands / fingers takes a bit of practice. I consistently have gotten about 3 hours of use out of the battery: wireless on, and display on set on dynamic, using Motion optimized power settings. In order to view the battery charge level, you have to remove the battery Ã¢â‚¬” not good.
The main item that kept me going back to the TC1100 and the M200 was Motion’s hardtop keyboard. To put it plainly Ã¢â‚¬” it stunk. I hated typing on it and it was pain to setup. In addition, if I needed to use one of the other USB ports, I had to remember to bring the extention cable with me so I could rotate it around. This is not the case with their new Convertible Keyboard. For the short time I had it, I found it to be a delight to type on. If I had to, I could type on it all day if I were mobile. The keys were silent, the mouse buttons were silent, and everything was where my fingers expected them to be. It had great tilt levels and was very balanced when used on my lap Ã¢â‚¬” a common practice in my house as I move from room to room to work. In addition. I could carry the tablet around and the keyboard would still be attached Ã¢â‚¬” something you could not do with the hardtop keyboard. The convertible keyboard doubles as a screen protector or attaches to the back of the tablet Ã¢â‚¬” whichever is your preference. I found it a little difficult to remove the keyboard from the back / front of the tablet using the latches. I had to really get my fingers between the latch and the tablet in order to get them separated. Again Ã¢â‚¬” could be an early prototype issue. The prototype I had was very difficult to remove once it was attached to the tablet Ã¢â‚¬” it took a lot of strength and grunting to separate the tablet from the keyboard.. I’m attributing that to having a very early prototype. I’ll post an update when I receive a replacement prototype.
I love this bump case. Its’ the first one I’ve owned. Its’ very light and all of the ports, microphones and buttons are still accessible when its’ in the case. The fingerprint reader is little difficult to use when the tablet is in the case, and the upper part of the pen garage is covered up by the leather. They also include a pad filler for when you are using the tablet without the extended battery. It fills the tapered space in the back of the tablet where the extended battery sits. It helps to provide a snug fit. When you have the extended battery, you don’t need the pad filler.
Based on my initial impressions with the convertible keyboard (not including the struggle to remove the keyboard which I chalk up to being a prototype), I can recommend that this tablet and the convertible keyboard as a good improvement over the TC1100 and also be a good hybrid solution for those convertible users looking for something more mobile. The 12Ã¢â‚¬Â screen is really nice and at times I forgot that I was working with 1024 x 768, particularly when using it in landscape mode. The viewing angles on this tablet are amazing. View Anywhere should be standard. I’m a little disappointed in the fingerprint struggles. Once I got my finger verified, though, it worked great. The scrolling option is a huge plus. They improved the speed and kept the fan noise level almost to nothing. Its’ thinner and lighter. Couple those improvements with the ability to add in the extended battery and not affect the dimensions of the tablet in any noticeable way, and you’ve got yourself a top-of-the-line tablet and the new standard in slate tablet pcs. Other OEMs should now be on notice.
This article may contain affiliate links. Click here for more details.